STAINLESS STEEL PRODUCTS
PRODUCT CATALOG FLOOR DRAINS
www.att.eu
General information
About us
STAINLESS STEEL PRODUCTS
All floor drains and rodding eyes are made from stainless steel V2A (AISI 304) or V4A (AISI 316). The floor drain type depends on the load, amount of drained water and structural parameters (i.e. the floor thickness). The floor drains are made of 1,5-2 [mm] steel sheets. All components are welded in argon shield to ensure high quality of joints.
The following floor drain types are available: heavy duty with vertical outlet
Floor drains
heavy duty with horizontal outlet mini with vertical outlet mini with horizontal outlet
Slot drainage channels
bathroom with vertical outlet bathroom with horizontal outlet LEGEND TO THE CATALOG SYMBOLS ? W - heavy duty floor drain with square upper part D - heavy duty floor drain with round upper part Wm - mini floor drain with square upper part Dm - mini floor drain with round upper part Wl - bathroom floor drain with square upper part
}
}}}
Standard drainage channels
countersunk with vertical outlet
V
1
H
2
XXX / YYY
B - perforated sheet grating K - anti-slip grating D - ladder grating P - plate grating S - plate grating with circumference gasket (so-called tight cover)
WHERE:
Other components
Furniture
Manhole covers
XXX - upper part dimension YYY - outlet diameter
1.1
V - vertical H - horizontal 1 - single-part 2 - two-part
EXAMPLE 1:
EXAMPLE 2:
D255/110V1-S is the floor drain:
Wm200/110H2-B is the floor drain:
heavy duty
mini
with round upper part 255 [mm]
with square lower part 200x200 [mm]
with DN 110 [mm] outlet
with DN 110 [mm] outlet
vertical
horizontal
single-part
two-part
with tight cover (plate grating with circumference gasket)
with perforated sheet grating
www.att.eu
General information
General information STAINLESS STEEL PRODUCTS
DESCRIPTION OF THE FLOOR DRAINS COMPONENTS: About us
Bodies - round shape limits waste accumulation and enables easy waste removal. The welded joints are grinded to remove sharp edges and ensure safe installation or cleaning.
Gratings - available in various shapes, dimensions and finishing versions. The gratings are selected according to the loads and location of installation.We offer the following grating types: mesh anti-slip, ladder, plate and perforated sheet.
Floor drains
Waste baskets - recommended when the drained wastewater has a high content of solids.
Strainers - used when the amount of solids is small.
Flanges - used when it’s necessary to drain water from horizontal systems installed under the floor.
Selected according to application and load. Easy installation.
Slot drainage channels
ADVANTAGES:
Standard drainage channels
Traps - very functional and easy to maintain. Ensures easy access to the sewer, quick cleaning and offers a possibility of checking for locks.
Due to suitable trap design, each gully is also the sewer rodding eye.
Manhole covers
Simple design. Easily cleaned.
Furniture
SELECTING THE FLOOR DRAINS: The appropriate floor drains are selected on two basic parameters: Amount of drained wastewater (appropriate draining diameter and upper part dimension).
www.att.eu
Advantages
Other components
The load value, type and intensity (the load-bearing component is the grating, which can withstand a given load depending on its type and height).
1.2
Installation STAINLESS STEEL PRODUCTS
INSTALLATION OF SINGLE-PART FLOOR DRAINS:
About us
Make sure the drain pipe is at the correct height. During concrete pouring, the upper part should be 1-1,5 [mm] below floor level. Next floor layers can be made when the upper part is stabilized. During concrete pouring, pay attention and make sure, that the upper part clearance is not narrowed. Make sure concrete gets to all difficult accessible spaces.
Floor drains
INSTALLATION OF TWO-PART FLOOR DRAINS: First, put the lower part of the floor drain in the structural part of the floor. The upper part should be placed in the 15-20 [mm] recess to ensure adequate draining of the condensate from the damp-proof course.
Standard drainage channels
Make the damp-proof course and secure it with the clamping ring of the lower part. Next, position the upper part on the required level. The upper part edge should be placed about 1-1,5 [mm] below the floor level. Next floor layers can be made when the upper part is stabilized. During concrete pouring, pay attention and make sure, that the upper part clearance is not narrowed.
Other components
Furniture
Manhole covers
Slot drainage channels
Make sure concrete gets to all difficult accessible spaces.
Note! 1. In case it is necessary to maintain tight seal between the lower and upper part of the floor drain, use the grooveless wedge shaped gasket. 2. The levelling bolts help only to level the upper part and do not influence the load-bearing capacity of the floor drain.
1.3
www.att.eu
Installation
Single-part floor drains STAINLESS STEEL PRODUCTS
HEAVY DUTY VERTICAL FLOOR DRAINS WITH SQUARE UPPER PART SINGLE-PART About us
W
Grating
H
Waste basket
Floor drains
Trap
h1
Body
Gasket
Standard drainage channels
DN D
W200/110V1
CATALOG NUMBER
005110 - * DN
DIMENSIONS [mm]
W250/110V1
W300/160V1
W400/200V1
001110 - *
001160 - *
001200 - *
110
110
160
200 365
H
205
245
245
h1
90
90
90
90
D
157
195
255
W
200x200
250x250
300x300
352 400x400
LADDER GRATING SYMBOL - D
PERFORATED SHEET GRATING SYMBOL - B
PLATE GRATING SYMBOL - P
Furniture
MESH ANTI-SLIP GRATING SYMBOL - K
Manhole covers
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
Slot drainage channels
SYMBOL
Other components
www.att.eu
Single-part floor drains
1.4
Two-part floor drains STAINLESS STEEL PRODUCTS
About us
HEAVY DUTY VERTICAL FLOOR DRAINS WITH SQUARE UPPER PART TWO-PART
W
h2
Grating Upper part
H
Floor drains
Waste basket
Trap
Gasket
DN D
W200/110V2
W250/110V2
W300/160V2
W400/200V2
CATALOG NUMBER
006110 - *
002110 - *
002160 - *
002200 - *
DIMENSIONS [mm]
SYMBOL
DN
110
110
160
200
H
170
210
210
300
h1
90
90
90
90
h2
50-100
50-160
50-160
50-160
D
157
195
255
352
W
200x200
250x250
300x300
400x400
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
MESH ANTI-SLIP GRATING SYMBOL - K
LADDER GRATING SYMBOL - D
PERFORATED SHEET GRATING SYMBOL - B
PLATE GRATING SYMBOL - P
Other components
Furniture
Manhole covers
Slot drainage channels
Standard drainage channels
h1
Lower part
1.5
www.att.eu
Two-part floor drains
Single-part floor drains STAINLESS STEEL PRODUCTS
HEAVY DUTY HORIZONTAL FLOOR DRAINS WITH SQUARE UPPER PART SINGLE-PART About us
W Grating Waste basket H1
Gasket
DN
H
Floor drains
Trap
Body
Standard drainage channels
D
h1
W250/110H1
W300/160H1
W400/200H1
CATALOG NUMBER
007110 - *
003110 - *
001160 - *
003200 - *
DN
110
110
160
H
235
245
295
365
H1
160
170
195
240
DIMENSIONS [mm]
W200/110H1
200
h1
90
90
90
90
D
157
195
255
352
W
200x200
250x250
300x300
400x400
LADDER GRATING SYMBOL - D
PERFORATED SHEET GRATING SYMBOL - B
PLATE GRATING SYMBOL - P
Furniture
MESH ANTI-SLIP GRATING SYMBOL - K
Manhole covers
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
Slot drainage channels
SYMBOL
Other components
www.att.eu
Single-part floor drains
1.6
Two-part floor drains STAINLESS STEEL PRODUCTS
About us
HEAVY DUTY HORIZONTAL FLOOR DRAINS WITH SQUARE UPPER PART TWO-PART
W Grating Upper part h2
Gasket H1
Flange with clamping ring
H
Trap DN
Floor drains
Waste basket
D
h1
W200/110H2
CATALOG NUMBER
008110 - *
DIMENSIONS [mm]
SYMBOL
W250/110H2 004110 - *
W300/160H2 004160 - *
W400/200H2 004200 - *
DN
110
110
160
200
H
200
210
260
365
H1
125
135
160
200
h1
90
90
90
90
h2
50-100
50-160
50-160
50-160
D
157
195
255
352
W
200x200
250x250
300x300
400x400
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
MESH ANTI-SLIP GRATING SYMBOL - K
LADDER GRATING SYMBOL - D
PERFORATED SHEET GRATING SYMBOL - B
PLATE GRATING SYMBOL - P
Other components
Furniture
Manhole covers
Slot drainage channels
Standard drainage channels
Lower part
1.7
www.att.eu
Two-part floor drains
Single-part floor drains STAINLESS STEEL PRODUCTS
MINI VERTICAL FLOOR DRAINS WITH SQUARE UPPER PART SINGLE-PART
SYMBOL
About us
Grating
W
Wm150/50V1
Trap
DN
50
Body
H h1
150
D
110
W
150x150
h1
DIMENSIONS [mm]
60
Floor drains
032050 - *
CATALOG NUMBER
H
Gasket
DN D
Wm150/110V1
Grating
Standard drainage channels
SYMBOL
W
Gasket Trap DN
100
H
150
W
150x150
H
DIMENSIONS [mm]
032110 - *
Body DN
Manhole covers
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
Slot drainage channels
CATALOG NUMBER
NOTE ! THE FOLLOWING GRATINGS ARE AVAILABLE FOR THE Wm150 FLOOR DRAINS: LADDER GRATING SYMBOL - D
Furniture Other components
PERFORATED SHEET GRATING SYMBOL - B
www.att.eu
Single-part floor drains
1.8
Single-part floor drains STAINLESS STEEL PRODUCTS
About us
MINI VERTICAL FLOOR DRAINS WITH SQUARE UPPER PART SINGLE-PART
Grating SYMBOL
W
Wm200/50V1
Trap
DN
50
Body
H h1
150
D
110
W
200x200
DIMENSIONS [mm]
60 DN D
Standard drainage channels
Floor drains
h1
030050 - *
CATALOG NUMBER
H
Gasket
SYMBOL
Wm200/110V1
CATALOG NUMBER
030110 - *
Grating
W
110
H
150
W
200x200
H
DIMENSIONS [mm]
Trap DN
Body DN
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
MESH ANTI-SLIP GRATING SYMBOL - K
LADDER GRATING SYMBOL - D
PERFORATED SHEET GRATING SYMBOL - B
PLATE GRATING SYMBOL - P
Other components
Furniture
Manhole covers
Slot drainage channels
Gasket
1.9
www.att.eu
Single-part floor drains
Two-part floor drains STAINLESS STEEL PRODUCTS
MINI VERTICAL FLOOR DRAINS WITH SQUARE UPPER PART TWO-PART
Lower part
Wm150/110V2
DIMENSIONS [mm]
033110 - *
DN
110
H h1 h2 D W
140 90 50-130 137 150x150
h2
W
Gasket Upper part
Trap
Flange with clamping ring Lower part
Slot drainage channels
CATALOG NUMBER
DN D
Standard drainage channels
Grating SYMBOL
H
140 90 50-130 137 150x150
h1
H h1 h2 D W
Flange with clamping ring
h2
50
Upper part
Trap
Floor drains
DN
Gasket
H
033050 - *
W
h1
CATALOG NUMBER
DIMENSIONS [mm]
Wm150/50V2
About us
Grating SYMBOL
DN D
Manhole covers
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM. NOTE ! THE FOLLOWING GRATINGS ARE AVAILABLE FOR THE Wm150 FLOOR DRAINS: LADDER GRATING SYMBOL - D
Furniture Other components
PERFORATED SHEET GRATING SYMBOL - B
www.att.eu
Two-part floor drains
1.10
Two-part floor drains STAINLESS STEEL PRODUCTS
Grating Wm200/50V2
W
Gasket Upper part
Trap
140 90 50-130 137 200x200
Lower part
CATALOG NUMBER
031110 - *
DIMENSIONS [mm]
Wm200/110V2
DN
110
H h1 h2 D W
140 90 50-130 137 200x200
DN D
W
Gasket Upper part
Trap Flange with clamping ring Lower part DN D
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
MESH ANTI-SLIP GRATING SYMBOL - K
LADDER GRATING SYMBOL - D
PERFORATED SHEET GRATING SYMBOL - B
PLATE GRATING SYMBOL - P
Other components
Furniture
Manhole covers
Slot drainage channels
Grating SYMBOL
H
H h1 h2 D W
Flange with clamping ring
h1
50
H
DN
h1
DIMENSIONS [mm]
031050 - *
Standard drainage channels
Floor drains
CATALOG NUMBER
h2
SYMBOL
h2
About us
MINI VERTICAL FLOOR DRAINS WITH SQUARE UPPER PART TWO-PART
1.11
www.att.eu
Two-part floor drains
Single-part floor drains STAINLESS STEEL PRODUCTS
MINI HORIZONTAL FLOOR DRAINS WITH SQUARE UPPER PART SINGLE-PART About us
Wm150/50H1
Grating
042050 - * 50
H H1 h1 D W
150 120 60 110 150x150
Trap Body DN
DN
Gasket
D
h1
Standard drainage channels
W Wm150/110H1
CATALOG NUMBER
042110 - *
Grating
H
DN
110
H H1 h1 D W
202 147 115 110 150x150
Body
DN
DIMENSIONS [mm]
Trap
H1
Gasket
D
Slot drainage channels
SYMBOL
Floor drains
DIMENSIONS [mm]
CATALOG NUMBER
W
H1 H
SYMBOL
h1
Manhole covers
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM. NOTE ! THE FOLLOWING GRATINGS ARE AVAILABLE FOR THE Wm150 FLOOR DRAINS: LADDER GRATING SYMBOL - D
Furniture Other components
PERFORATED SHEET GRATING SYMBOL - B
www.att.eu
Single-part floor drains
1.12
Single-part floor drains STAINLESS STEEL PRODUCTS
About us
MINI HORIZONTAL FLOOR DRAINS WITH SQUARE UPPER PART SINGLE-PART
Wm200/50H1
CATALOG NUMBER
040050 - *
W Grating Gasket
152 123 60 110 200x200
Trap
H
50
H H1 h1 D W
DN
DIMENSIONS [mm]
DN
Body
D
h1
Standard drainage channels
Floor drains
H1
SYMBOL
W Wm200/110H1
Gasket
040110 - *
H H1 h1 D W
202 147 60 115 200x200
H
110
Body DN
DIMENSIONS [mm]
Trap DN
H1
CATALOG NUMBER
Grating
D
h1
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
MESH ANTI-SLIP GRATING SYMBOL - K
LADDER GRATING SYMBOL - D
PERFORATED SHEET GRATING SYMBOL - B
PLATE GRATING SYMBOL - P
Other components
Furniture
Manhole covers
Slot drainage channels
SYMBOL
1.13
www.att.eu
Single-part floor drains
Two-part floor drains STAINLESS STEEL PRODUCTS
MINI HORIZONTAL FLOOR DRAINS WITH SQUARE UPPER PART TWO-PART About us
W
H1
115
h1
60
h2
50-130
D W
137 150x150
Flange with clamping ring Lower part
h2
Trap
H1
50 145
Floor drains
DN H
Gasket
Upper part
H
043050 - *
Grating
DN
CATALOG NUMBER
[mm]
Wm150/50H2
DIMENSIONS
SYMBOL
D
h1
Standard drainage channels
H1
50 145 85
h1
60
h2
50-130
D W
137 150x150
Upper part
h2
Gasket Trap
Flange with clamping ring Lower part
D
H
[mm]
DN H
Grating
H1
043110 - *
W
DN
CATALOG NUMBER
DIMENSIONS
Wm150/110H2
Slot drainage channels
SYMBOL
h1
Manhole covers
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM. NOTE ! THE FOLLOWING GRATINGS ARE AVAILABLE FOR THE Wm150 FLOOR DRAINS: LADDER GRATING SYMBOL - D
Furniture Other components
PERFORATED SHEET GRATING SYMBOL - B
www.att.eu
Two-part floor drains
1.14
Two-part floor drains STAINLESS STEEL PRODUCTS
About us
MINI HORIZONTAL FLOOR DRAINS WITH SQUARE UPPER PART TWO-PART
W SYMBOL
Wm200/50H2
CATALOG NUMBER
041050 - *
Grating
h2
50-130
D W
137 200x200
Flange with clamping ring Lower part
040110 - *
DN H [mm]
H1
50 145 85
h1
60
h2
50-130
D W
137 200x200
h2
Gasket Upper part
Trap
Flange with clamping ring Lower part
H1
CATALOG NUMBER
Grating
DN
Wm200/110H2
DIMENSIONS
Slot drainage channels
h1
D
h1
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
MESH ANTI-SLIP GRATING SYMBOL - K
LADDER GRATING SYMBOL - D
PERFORATED SHEET GRATING SYMBOL - B
PLATE GRATING SYMBOL - P
Other components
Furniture
Manhole covers
D
W SYMBOL
H
60
H1
115
h1
h2
H1
Trap
Upper part
H
50 145
DN
[mm]
DIMENSIONS
DN H
Standard drainage channels
Floor drains
Gasket
1.15
www.att.eu
Two-part floor drains
Floor drains with extra flange STAINLESS STEEL PRODUCTS
MINI VERTICAL FLOOR DRAIN SINGLE-PART Wm200/110V1 WITH EXTRA BITUMINOUS FLANGE
CATALOG NUMBER
[mm]
Gasket Trap
110 185 200x200
Body
Floor drains
DN H W
DIMENSIONS
030111 - *
Extra flange
H
Wm200/110V1
SYMBOL
W
About us
Grating
DN
Grating
W
Extra flange
DIMENSIONS [mm]
DN H h1 h2 W
031111 - * 110 140
Lower part
Flange with clamping ring
90 50-130 200x200
Slot drainage channels
CATALOG NUMBER
Upper part
Trap
H
Wm200/110V2
h1
SYMBOL
h2
Gasket
Standard drainage channels
MINI VERTICAL FLOOR DRAIN TWO-PART Wm200/110V2 WITH EXTRA BITUMINOUS FLANGE
DN D
LADDER GRATING SYMBOL - D
PERFORATED SHEET GRATING SYMBOL - B
PLATE GRATING SYMBOL - P
Furniture
MESH ANTI-SLIP GRATING SYMBOL - K
Manhole covers
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
Other components
www.att.eu
Floor drains with extra flange
1.16
Single-part floor drains STAINLESS STEEL PRODUCTS
SYMBOL
W250/104V1
Grating
CATALOG NUMBER
001104 - *
Waste basket Trap
104
H
170
h1
80
D
195
W
250x250
Body h1
DN
H
W
DIMENSIONS [mm]
Floor drains
About us
VERTICAL COUNTERSUNK FLOOR DRAIN WITH SQUARE UPPER PART W250/104V1 SINGLE-PART
DN
Manhole covers
VERTICAL COUNTERSUNK FLOOR DRAIN WITH ROUND UPPER PART D255/104V1 SINGLE-PART
CATALOG NUMBER
009104 - *
DN
104
H
170
h1
80
D φ
195
O
Grating 7~8
Waste basket Trap
H
D255/104V1
Body
255
h1
SYMBOL
DIMENSIONS [mm]
Slot drainage channels
Standard drainage channels
D
DN D
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
LADDER GRATING SYMBOL - D
Other components
Furniture
MESH ANTI-SLIP GRATING SYMBOL - K
PLATE GRATING SYMBOL - P
1.17
www.att.eu
Single-part floor drains
Single-part floor drains STAINLESS STEEL PRODUCTS
HEAVY DUTY VERTICAL FLOOR DRAIN WITH ROUND UPPER PART D255/110V1 SINGLE-PART About us
O
Grating 7~8
D255/110V1 009110 - * 110 245 90
D φ
195 255
Body Gasket h1
DN H h1
Trap
Floor drains
DIMENSIONS [mm]
CATALOG NUMBER
H
SYMBOL
Waste basket
DN D
O
Grating 7~8
DN H h1
110 210 90
h2
50-160
D φ
195 255
Upper part Trap
H
DIMENSIONS [mm]
010110 - *
Lower part Gasket
Slot drainage channels
CATALOG NUMBER
Waste basket
h2
D255/110V2
h1
SYMBOL
Standard drainage channels
HEAVY DUTY VERTICAL FLOOR DRAIN WITH ROUND UPPER PART D255/110V2 TWO-PART
DN D
MESH ANTI-SLIP GRATING SYMBOL - K
Manhole covers
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
LADDER GRATING SYMBOL - D
Furniture Other components
PLATE GRATING SYMBOL - P
www.att.eu
Two-part floor drains
1.18
Single-part floor drains STAINLESS STEEL PRODUCTS
O D255/110H1
195 255
H
Trap
DN
DIMENSIONS [mm]
90
D φ
Body
D
h1
HEAVY DUTY HORIZONTAL FLOOR DRAIN WITH ROUND UPPER PART D255/110H2 TWO-PART
O
D255/110H2
h1
90
h2
50-160 195 255
Lower part
Upper part
Trap
h2 H1
110 210 135
Grating Waste basket
012110 - *
DN H H1
D φ
7~8
H
CATALOG NUMBER
DIMENSIONS [mm]
Slot drainage channels
110 245 170
h1
SYMBOL
Manhole covers
Waste basket Gasket
011110 - *
DN H H1
Standard drainage channels
Floor drains
CATALOG NUMBER
H1
SYMBOL
Grating 7~8
DN
About us
HEAVY DUTY HORIZONTAL FLOOR DRAIN WITH ROUND UPPER PART D255/110H1 SINGLE-PART
Gasket
D
h1
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
LADDER GRATING SYMBOL - D
Other components
Furniture
MESH ANTI-SLIP GRATING SYMBOL - K
PLATE GRATING SYMBOL - P
1.19
www.att.eu
Two-part floor drains
Single-part floor drains STAINLESS STEEL PRODUCTS
MINI VERTICAL FLOOR DRAIN WITH ROUND UPPER PART Dm200/110V1 SINGLE-PART About us
O
Grating 7~8
Floor drains
Gasket
H
Body
Standard drainage channels
DN
CATALOG NUMBER
DIMENSIONS [mm]
034110 - *
DN
110
H
185
φ
200
MESH ANTI-SLIP GRATING SYMBOL - K
Manhole covers
* THE CATALOG NUMBER SHOULD BE SUPPLEMENTED WITH SUITABLE GRATING SYSTEM.
Slot drainage channels
Dm200/110V1
SYMBOL
LADDER GRATING SYMBOL - D
Furniture Other components
PLATE GRATING SYMBOL - P
www.att.eu
Single-part floor drains
1.20
Floor drains with tight cover STAINLESS STEEL PRODUCTS
About us
MINI VERTICAL FLOOR DRAIN WITH TIGHT COVER Dm200/110V1S SINGLE-PART
O
Grating Gasket Gasket
H
Trap
Standard drainage channels
Floor drains
Body
DN
MINI HORIZONTAL FLOOR DRAIN WITH TIGHT COVER Dm200/110H1S SINGLE-PART
O
Grating Gasket
H DN
Body
D
h1
SYMBOL
Dm200/110V1S
Dm200/110H1S
CATALOG NUMBER
034110 - S
044110 - S
DN
110
110
H
185
205
DIMENSIONS [mm]
Furniture
H1
Trap
Manhole covers
Slot drainage channels
Gasket
H1
-
150
h1
-
115
D φ
-
110
200
200
IN CASE OF THE FLOOR DRAINS WITH TIGHT COVER, WE USE PLATE GRATING WITH 8 [mm] THICKNESS AND THE CIRCUMFERENCE GASKET.
Other components
GRATING SYMBOL - S (TIGHT COVER)
1.21
www.att.eu
Floor drains with tight cover
Floor drains with tight cover STAINLESS STEEL PRODUCTS
HEAVY DUTY VERTICAL FLOOR DRAIN WITH TIGHT COVER D255/110V1S SINGLE-PART
Gasket
About us
O
Grating 7~8
Waste basket H
Trap Body Gasket h1
Floor drains
DN D
Grating
O
Gasket
Standard drainage channels
HEAVY DUTY HORIZONTAL FLOOR DRAIN WITH TIGHT COVER D255/110H1S SINGLE-PART
H1
Waste basket
DN
H
Trap
Slot drainage channels
Body
Gasket
D
h1
DIMENSIONS [mm]
CATALOG NUMBER
009110S
DN H H1
110 245 -
010110S
Manhole covers
D255/110V1S D255/110H1S
SYMBOL
110 245 170
90
90
D
195
195
φ
255
255
IN CASE OF THE FLOOR DRAINS WITH TIGHT COVER, WE USE PLATE GRATING WITH 8 [mm] THICKNESS AND THE CIRCUMFERENCE GASKET.
Furniture
h1
GRATING SYMBOL - S (TIGHT COVER) Other components
www.att.eu
Floor drains with tight cover
1.22
Bathroom floor drains STAINLESS STEEL PRODUCTS
About us
VERTICAL BATHROOM FLOOR DRAINS SINGLE-PART
Grating
W
Wl100/50V1 Wl150/50V1 061050 - B
50 61
50 77
35
50
100x100
150x150
Body
H
063050 - B
h1
CATALOG NUMBER DN H h1
DIMENSIONS [mm]
Floor drains
SYMBOL
W
HORIZONTAL BATHROOM FLOOR DRAINS SINGLE-PART
W
062050 - B
50 161
50 177
136
152
100x100
150x150
W
Body H
064050 - B
Grating
H1
DIMENSIONS [mm]
CATALOG NUMBER DN H H1
Wl100/50H1 Wl150/50H1
DN
SYMBOL
Manhole covers
Slot drainage channels
Standard drainage channels
DN
Furniture
THE BATHROOM FLOOR DRAINS FEATURE PERFORATED SHEET GRATINGS.
Other components
GRATING SYMBOL - B
1.23
www.att.eu
Bathroom floor drains
General information STAINLESS STEEL PRODUCTS
RODDING EYES
W
Rodding eyes
W
About us
Our systems can be used to solve draining problems in different industrial areas (hospitals, hotels, restaurants, chemical and pharmaceutical plants). Rodding eyes are manufactured in austenitic stainless grades AISI304 or AISI316. Edge finishing allows installation in different types of floor. We offer rodding eyes for severage tubes from DN100.
Gasket
Slot drainage channels
H
Gasket
DN
SYMBOL
Rw 200/110
051110 - *
Rw 200/160
051160 - *
Rw 250/160
052160 - *
Rw 250/200
052200 - *
Rw 300/160
053160 - *
Rw 300/200
053200 - *
DN W H DN W H DN W H DN W H DN W H DN W H DN W H
110 150 150 110 200 140 160 200 140 160 250 140 200 250 140 160 300 140 200 300 140
General information
Other components
050110 - *
Furniture
Rw 150/110
DIMENSIONS [mm]
Manhole covers
www.att.eu
CATALOG NUMBER
Standard drainage channels
W
1.24
Advantages STAINLESS STEEL PRODUCTS
Rodding eyes
About us
COVER TYPES:
Standard drainage channels
Anti-slip cover
Smooth cover
RODDING EYES COMPONENTS:
body,
Manhole covers
Slot drainage channels
screw locked cover, gasket.
ADVANTAGES: High durability. Isolating from foreign odors.
Furniture
Easy installation. Good fit with interior design.
Other components
INSTALLATION:
1.25
Make sure the drain pipe is at the correct height. During concrete pouring, the upper part should be 1-1,5 [mm] below floor level.
www.att.eu
Advantages