1 Modular Control System User Manual MCS-3C-IDSH, RS-232 Interface OEM Module Page Flötenstraße 70 D Oldenburg 1http:// Tel.: +49 (0) Fax:...
1 VIPA System 00V CPU Manual HB97E_CPU RE_1x-BP03 Rev. 14/44 October 0142 Copyright VIPA GmbH. All Rights Reserved. This document contains proprietary...
1 VIPA System 00V CPU Manual HB97E_CPU RE_1x-BE03 Rev 14/44 October 0142 Copyright VIPA GmbH All Rights Reserved This document contains proprietary in...
1 MODULAR SWITCH CONTROL SYSTEM MSCS Expandable switch control system. Description ICS's Modular Switch Control System (MSCS) provides the system desi...
1 System 100V System 200V System 300V System 300S System 500S Operator Panels Software Accessories System Summary April VIPA GmbH Ohmstr. 4 D Herzogen...
1 The Role of Modular Programming in Industrial Control System Varun 1, Ritula Thakur 2 1 M.E Scholar, Electrical Engineering Department, NITTTR Chand...
1 CCTV LTC 86 Series Allegiant Matrix/Control Systems - Modular LTC 86 Series Allegiant Matrix/Control Systems - Modular 128 Camera by 16 monitor swit...
1 A Modular Control System for Remote Subsea Equipment by Eric Stephen Smith Bachelor of Science Mechanical Engineering North Carolina State Universit...
1 Video 86 Series Allegiant Matrix/Control Systems - Modlar 86 Series Allegiant Matrix/Control Systems - Modlar Camera by 16 monitor switching Modlar ...
1 Open Architecture Control System for a Modular Reconfigurable Machine Tool Submitted by: Mr AQM Amra BSc Eng, UKZN Supervisor: Prof. G Bright May 20...
200V The modular control system
200V – Flexible in every direction
Step7 code programmable with WinPLC7 from VIPA or the SIMATIC Manager
Performance and application
• 200V designed for centralized and decentralized automation tasks. • The compact 200V has the instruction set of the 300S.
• 200V is programmable with WinPLC7 from VIPA, or tools of other manufacturers in LAD, FDB and STL, and soon with VIPA SPEED7 Studio.
• Work and load memory already integrated. • Operation without additional memory card. • From 48KB up to 128 KB working memory available depending on the CPU version.
• Well thought out concept and large variety of modules. • Choice of diverse SSI, servo or stepper modules for positioning tasks and distance measurements .
• Fieldbus master and slave modules with different fieldbus protocols are available in system 200V, therefore it can act, manufacturer independent, as a master controller as well as a subordinated fieldbus slave unit.
200V at a glance
ERP & MES
200V is a modular control system for centralized and decentralized applications. Its compactness in combination with the instruction set of a S7-300 CPU makes the system 200V a rock-solid and unique system. 200V is a very compact and modular expandable system. The system is designed for centralized and decentralized automation tasks. With a central construction of up to a maximum of 32 modules directly on the CPU and with up to 126 fieldbus slave modules including up to 32 modules per fieldbus slave module, the 200V can be deployed with enormous flexibility. The module-size allows the deployment in almost any automation environment . Communicative With the wide range of communication and fieldbus modules the system also supports complex assembly topologies and is deployed in thousands of
installations worldwide. The well thought out modular concept enables the customized deployment up to the middle power range – for almost every application. Extensive ability to communicate and up-to-date protocols. • MPI interface always on board • Ethernet on board, ISOTCP, TCP/IP, UDP, RFC1006, MODBUS TCP • Support of PROFIBUS, CANopen, DeviceNET and INTERBUS
Innovative data storage concept • Integrated work memory – operation without additional memory card • Integrated ROM memory for constant saving of program and data • Integrated battery-backed RAM memory • Support of MMC cards for saving program and data
200V – The system
Work memory Stand-Alone-CPUs Load memory Work memory Ethernet PG/OP Load memory Interface